Industrial And Domestic Inverter

Approx. Rs 8,500 / NumberGet Latest Price

Our organization is one of the prestigious manufacturers and suppliers of Solar Sine Wave Solar PCU 600 VA to 10 KVA Single phase.With Zero drop and MPPT Charge controllers. These products are properly supervised and examined by the skilled and experienced experts to ensure zero defect output results and high performance product.

Features:

Its design is Solar priority based. When solar is present and battery is full charged ,it automatically Disconnects the mains and load runs on Solar .When solar is off and Battery goes low ,it automatically switched to Mains mode.It utilises maximum solar power.

• Cost-effective

• High Efficiency

• Fine furnish

• Reasonable price

• Saves power

• Long lasting

Specifications:

AC Input:

• Rating: 3 KW

• Voltage: 230 V + 20% - 30%

• Frequency: 50 Hz ± 10%

• Phase: Single phase

DC Voltage: 48 Volt

• 3000 W: 48V

• Charging current in Mains mode : 10 Amps

• Charger Type: SMPS in Mains mode and ZERO DROP and MPPT in Solar chrging

Inverter:

• Technology: DSP controlled MOSFET based

• Output Voltage: 230 V AC Single phase

• Voltage Regulation: ± 2%

• Frequency: 50 Hz ± 0.5 Hz

• Waveform: PWM sine wave

• Harmonic Distortion: Less than 3% (no load to full load)

• Inverter Efficiency: >85%

• Power Factor: 0.8

• Overload: 150% for 30 sec

• Audible Noise: Less than 45 dB at 1 meter

Indications:

• Mains On, inverter On, Solar ON ,battery low, overload, charging ON / LCD optional

General:

• Dimensions (L x W x H): 400 x 300 x 400 MM

• Humidity: Max 95%, non-condensing

Additional Information:

Approx. Rs 5,000 / WattGet Latest Price

We are counted among the prominent manufacturers and suppliers of Sine Wave Inverter 800 VA. Products we offer are demanded by our patrons due to their high performance. Apart from this, patrons can avail these products in reasonable price.

Specifications:

AC Input:

• Rating: 800 VA

• Voltage: 230 V + 20% - 30%

• Frequency: 50 Hz± 10%

• Phase: Single phase

DC Voltage: 12 Volt

• 800 VA: 12 V

• Charging current: 10 Amps

• Charger Type: SMPS

Inverter:

• Technology: MOSFET

• Output Voltage: 230 V AC single phase

• Voltage Regulation: ± 2%

• Frequency: 50 Hz ± 0.5 Hz

• Waveform: PWM Sine wave

• Harmonic Distortion: Less than 3% (no load to full load)

• Inverter Efficiency: >85%

• Power Factor: 0.8

• Overload: 150% for 30 sec

• Audible Noise: Less than 45 dB at 1 meter

Indications:

• Mains On, inverter On, battery low, overload, charging ON/LCD optional

General:

• Dimensions (L x W x H): 350 x 350 x 180 MM

• Humidity: Max 95%, non condensing

Features:

• Cost-effective

• Seamless finish

• Fine furnish

• Reasonable price

• Saves power

• Long lasting

• Optimality

Additional Information:

Product Price :Get Latest Price

With the constant support of our dexterous workforce, we are able to provide high quality Three Phase Sine Wave Inverter. These products are fabricated by using quality-approved raw material, which is sourced from the most trusted and reliable vendor in the market.

Features:

• Reasonable price

• Saves power

• Long lasting

• Seamless

• High performance

• Optimality

Specifications:

Model: Maxi 10000

• Rating: 10 KVA

• AC Input: 415 V + 15% -20% three phase input

• Frequency: 50 Hz ± 6%

• DC Voltage: 180/ 360 VDC

• Charging Time: 12 Hour for 90% of full capacity

• Charger Type: CVCC internal controlled rectifier type

Inverter:

• Technology: IGBT double conversion

• Output Voltage: 400 V AC three phase

• Voltage Regulation: ±2% % for DC I/p variation & o/p load variation

• Frequency: 50 Hz ± 0.5 Hz

• Waveform: PWM Sine wave

• Harmonic Distortion: Less than 3%

• Inverter Efficiency: >92%

• Power Factor: 0.8

• Overload: 150% for 60 sec

• Crest Factor: 3:1

• Phase Displacement: 1200 ± 10

• Audible Noise: Less than 50 dB at 1 meter

General:

• Dimension (L x W x H): 1040 x 350 x 910 MM

• Humidity: Max 95%, non-condensing

Indications & Alarms:

• Mains on: Indication

• Inverter on: Indication

• DC low: Indication & alarm

• Fault: Indication & alarm

• Output overload: Indication & alarm

Changeover:

• Static Switch - Manual: Bi-directional

Additional Information: